Marco Filipe Pinto Leite
AuthID: R-001-ST0
1
TÃTULO: Lean and Green Manufacturing Operationalization Through Multi-Layer Stream Mapping - Lean&Green 4.0
AUTORES: Pecas, Paulo; Lopes, Jessica; Jorge, Diogo; Sahul, Anshuman Kumar; Baptista, Antonio J. ; Leiter, Marco;
PUBLICAÇÃO: 2024, FONTE: 43rd IFIP WG 5.7 International Conference on Advances in Production Management Systems (APMS) in ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS-PRODUCTION MANAGEMENT SYSTEMS FOR VOLATILE, UNCERTAIN, COMPLEX, AND AMBIGUOUS ENVIRONMENTS, APMS 2024, PT III, VOLUME: 730
AUTORES: Pecas, Paulo; Lopes, Jessica; Jorge, Diogo; Sahul, Anshuman Kumar; Baptista, Antonio J. ; Leiter, Marco;
PUBLICAÇÃO: 2024, FONTE: 43rd IFIP WG 5.7 International Conference on Advances in Production Management Systems (APMS) in ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS-PRODUCTION MANAGEMENT SYSTEMS FOR VOLATILE, UNCERTAIN, COMPLEX, AND AMBIGUOUS ENVIRONMENTS, APMS 2024, PT III, VOLUME: 730
2
TÃTULO: Data-Driven Root-Cause Analysis in the Scope of Continuous Improvement Projects
AUTORES: Botelho, Hugo; Pecas, Paulo; Jorge, Diogo; Mcleod, James; Albertoni, Loris; de Oliveira, Luis Caldas; Leite, Marco;
PUBLICAÇÃO: 2024, FONTE: 43rd IFIP WG 5.7 International Conference on Advances in Production Management Systems (APMS) in ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS-PRODUCTION MANAGEMENT SYSTEMS FOR VOLATILE, UNCERTAIN, COMPLEX, AND AMBIGUOUS ENVIRONMENTS, APMS 2024, PT III, VOLUME: 730
AUTORES: Botelho, Hugo; Pecas, Paulo; Jorge, Diogo; Mcleod, James; Albertoni, Loris; de Oliveira, Luis Caldas; Leite, Marco;
PUBLICAÇÃO: 2024, FONTE: 43rd IFIP WG 5.7 International Conference on Advances in Production Management Systems (APMS) in ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS-PRODUCTION MANAGEMENT SYSTEMS FOR VOLATILE, UNCERTAIN, COMPLEX, AND AMBIGUOUS ENVIRONMENTS, APMS 2024, PT III, VOLUME: 730
3
TÃTULO: Empirical estimation of metal powder bed fusion technological improvement rate
AUTORES: Alves de Campos, Antonio; Torres Ferreira, Bruna; Goncalves, Afonso; Leite, Marco; Ribeiro, Ines; L. Magee, Christopher; Henriques, Elsa;
PUBLICAÇÃO: 2024, FONTE: PROGRESS IN ADDITIVE MANUFACTURING
AUTORES: Alves de Campos, Antonio; Torres Ferreira, Bruna; Goncalves, Afonso; Leite, Marco; Ribeiro, Ines; L. Magee, Christopher; Henriques, Elsa;
PUBLICAÇÃO: 2024, FONTE: PROGRESS IN ADDITIVE MANUFACTURING
INDEXADO EM: 
Scopus 
WOS
Scopus WOS4
TÃTULO: Electro-discharge machining using copper-coated additively-manufactured AlSi10Mg electrodes
AUTORES: Sahu, Anshuman Kumar; Mahapatra, Siba Sankar; Patterson, Albert E.; Leite, Marco; Pecas, Paulo; Singh, Yogesh; Sahoo, Santosh Kumar;
PUBLICAÇÃO: 2024, FONTE: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
AUTORES: Sahu, Anshuman Kumar; Mahapatra, Siba Sankar; Patterson, Albert E.; Leite, Marco; Pecas, Paulo; Singh, Yogesh; Sahoo, Santosh Kumar;
PUBLICAÇÃO: 2024, FONTE: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
INDEXADO EM: Scopus WOS
Scopus WOS5
TÃTULO: Polymer-Metal Adhesion of Single-Lap Joints Using Fused Filament Fabrication Process: Aluminium with Carbon Fiber Reinforced Polyamide
AUTORES: Martins, Guilherme; Vicente, Carlos M. S.; Leite, Marco;
PUBLICAÇÃO: 2023, FONTE: APPLIED SCIENCES-BASEL, VOLUME: 13, NÚMERO: 7
AUTORES: Martins, Guilherme; Vicente, Carlos M. S.; Leite, Marco;
PUBLICAÇÃO: 2023, FONTE: APPLIED SCIENCES-BASEL, VOLUME: 13, NÚMERO: 7
INDEXADO EM: Scopus WOS
Scopus WOS6
TÃTULO: Validation of a low-cost selective powder deposition process through the characterization of tin bronze specimens
AUTORES: Magalhaes, S; Sardinha, M; Vicente, C; Leite, M; Ribeiro, R; Vaz, M; Reis, L;
PUBLICAÇÃO: 2021, FONTE: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
AUTORES: Magalhaes, S; Sardinha, M; Vicente, C; Leite, M; Ribeiro, R; Vaz, M; Reis, L;
PUBLICAÇÃO: 2021, FONTE: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
INDEXADO EM: WOS
WOS7
TÃTULO: Integrating life cycle assessment (LCA) and life cycle costing (LCC) in the early phases of aircraft structural design: an elevator case study Full Text
AUTORES: Elcin Aleixo Calado; Marco Leite; Arlindo Silva;
PUBLICAÇÃO: 2019, FONTE: INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT, VOLUME: 24, NÚMERO: 12
AUTORES: Elcin Aleixo Calado; Marco Leite; Arlindo Silva;
PUBLICAÇÃO: 2019, FONTE: INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT, VOLUME: 24, NÚMERO: 12
INDEXADO EM: Scopus WOS
Scopus WOS8
TÃTULO: 0-3D Design method: a new design management technique to support Design for Manufacturing
AUTORES: Baptista, AJ ; Reis, L; Leite, M;
PUBLICAÇÃO: 2019, FONTE: 29th CIRP Design Conference (CIRP Design) in 29TH CIRP DESIGN CONFERENCE 2019, VOLUME: 84
AUTORES: Baptista, AJ ; Reis, L; Leite, M;
PUBLICAÇÃO: 2019, FONTE: 29th CIRP Design Conference (CIRP Design) in 29TH CIRP DESIGN CONFERENCE 2019, VOLUME: 84
9
TÃTULO: Experimental and numerical modelling of mechanical properties of 3D printed honeycomb structures Full Text
AUTORES: Biranchi Panda; Marco Leite; Bibhuti Bhusan Biswal; Xiaodong D Niu; Akhil Garg;
PUBLICAÇÃO: 2018, FONTE: MEASUREMENT, VOLUME: 116
AUTORES: Biranchi Panda; Marco Leite; Bibhuti Bhusan Biswal; Xiaodong D Niu; Akhil Garg;
PUBLICAÇÃO: 2018, FONTE: MEASUREMENT, VOLUME: 116
INDEXADO EM: Scopus WOS
Scopus WOS10
TÃTULO: STUDY OF THE INFLUENCE OF 3D PRINTING PARAMETERS ON THE MECHANICAL PROPERTIES OF PLA
AUTORES: Joao Fernandes; Augusto M Deus; Luis Reis; Maria Fatima Vaz; Marco Leite;
PUBLICAÇÃO: 2018, FONTE: 3rd International Conference on Progress in Additive Manufacturing (Pro-AM) in PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, VOLUME: 2018-May
AUTORES: Joao Fernandes; Augusto M Deus; Luis Reis; Maria Fatima Vaz; Marco Leite;
PUBLICAÇÃO: 2018, FONTE: 3rd International Conference on Progress in Additive Manufacturing (Pro-AM) in PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, VOLUME: 2018-May
INDEXADO EM: Scopus WOS
Scopus WOS